Shall provide single window view of all inputs and outputs, audio processing blocks, routing, mix points, and virtual routing.Shall provide an Emulate mode for offline configuration.Shall provide a Live mode for real-time control of parameters without compiling and file uploading to processor.Shall provide PC-based DSP Configurator software allowing flexible control of the digital signal processor’s fixed architecture.Shall provide a THD+N measurement of less than 0.01%, measured at 1 kHz, at maximum output level.Shall provide a signal-to-noise ratio of greater than 105 dB measured from 20 HZ to 20 kHz, at maximum output, unweighted.Audio Device Requirements - Input to Output.Shall provide a maximum, deterministic latency of 4.5 ms from input to output.Shall support 32-bit and 64-bit processing algorithms depending on process.Shall provide 64-bit floating point DSP engine.Shall provide digital to analog conversion at 48 kHz sampling rate with 24-bit resolution.Shall provide output attenuation adjustment from 0 dB to -100 dB in 0.1 dB steps, adjustable per output.Shall support four mono line level, balanced or unbalanced signals on four, 3-pole, 3.5 mm captive screw connectors.Shall provide analog to digital conversion at 48 kHz sampling rate with 24-bit resolution.Shall provide selectable +48 volt phantom power for condenser microphone on each input.Shall provide input gain adjustment from -18 dB to +80 dB in 0.1 dB steps, adjustable per input.Shall support six mono, microphone or line level, balanced or unbalanced signals on six 3-pole, 3.5 mm captive screw connectors.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |